Replacement Tappet for Surefeed Sealed Pet Bowl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Tappet for Surefeed Sealed Pet Bowl
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 296
- Makes
- 3
- Views
- 1,552
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years.
This part can replace this tappet making the bowl working again.
For better stability and to prevent the need of supports I took the arm and the axle apart. So they can be printed in the best position for a higher strength.
It looks not so sophisticated like the original part but is much stronger.
Print Settings
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.10 mm
Infill:
100%
Filament:
PLA white
Notes:
It's highly recommended to use a 0.2mm nozzle.
Post-Printing =============
The axle fits tight in the arms hole. No glue is necessary.
Category: Replacement Parts