Counting matching models…
This is a set of tilting stands for the Surefeed Pet Feeder, model MPF001. It's a modification of Wolf_Jameson's Surefeed Pet Feeder Adjustable Stand , specifically his model 2 version. He used screws to install pins to hold the stands in…
One of my cat instantly scarfs down her food and then tries to steal from other. Surefeed already sell a backpiece to help prevent stealing from the back, but nothing to stop the thief from pushing in from the front when the other is…
This helps stop other cats from stealing food. The size is for average, non-overweight cats. Although a small chonker would probably also fit!
I drafted this from scratch to meet the requirements of fitting in the space the original did and working the same way it did. The axle should be folded along the single layer hinge then inserted into the smaller, tapered, hole such that…
Essentially the same as the original design but with reinforced clips/guides
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
This simple bar was created to slip on the front of the bowl of a SureFeed cat feeder, it prevents other cats getting into the bowl. This works well with older models of the SureFeed cat feeder, if the side of it looks like this it's…
This is my remix of @Alca's SureFeed Mircrochip Pet Feeder Back/Rear Cover, which can be found on MakerWorld . I've made a handful of improvements, which are listed below. This model simply covers the back and sides of a SureFeed…
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years. This part can replace this tappet making the bowl working again. For better stability and to prevent the need of…
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right? Anyway, I am always happy to help. There was already a design on…
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
This isn't a big change, and the original probably works fine. It's just that I was bothered by those snap-fit legs because the bending load is concentrated at the base. This is the worst possible location for a bending load when a…
I've created this stand to elevate the feeder a bit. My cat has acid reflux (renal issues) and it's important to not have the food too much lower than it's abdomen. It's not a perfect solution but it does work and he keeps eating from it.…
Set of tilting stands for an older model Sureflap feeder. It's a remix from @MichaelMoss_347532 Surefeed Pet Feeder Adjustable Stand (Modified) . The previous model fits the newer generation of feeders and this remix fits the older…
Tappet lift arm remixed to utilise a steel dowel, Diameter 3mm, length 8mm (min 6mm). Have had these feeders break both on the tappet and also the cam - they seem very weak for the duty they perform. Modelled the Original Cam and a…
I liked the design of the cat cutout version from @MaikaRose_777491 for my heftier cats, but needed more reinforced clips because the top clips kept breaking off when I tried to connect it to my feeders. I combined the shape of Maika's…
If you have a SureFeed MPF001 and it runs its motor but can't lift its lid, you may need this part. Or maybe https://www.printables.com/model/209284-surefeed-mpf001-lid-opener-repair-part Open it up and take a look. I replaced the short…
Cut the frame so I could print 1/2 at a time with a top clip on each half to accommodate printers with smaller areas. Use the Mirror setting on your slicer to print the other half. Did not require scaffolding when I printed it. Thank you…
Works well for my kitties. You'll want to print 2 copies, then it attaches by: Adding VHB tape to each piece Adding CA glue to the insides of each piece Attaching them in place; hold them a bit until the CA glue sets Extra hungry kitties…
The two STL files are similar but the top clip is updated on the second to add a more secure fit
This is a replacement tray for SureFeed microchip cat feeders. I made it from Flexfill 98A TPU, so that it's dishwasher proof. It requires supports for printing and they are a bit annoying to remove, but it works. I suspect you could also…
This is a simple name tag for the Sure Petcare SureFeed Microchip Pet Feeder. I have 2 cats with each their own, and I kept confusing the bowls. This name tag works even if you're using the back cover on your bowl. I've printed them in…
This is a small replacement part designed for the SureFeed microchip cat feeder that props open the clear plexiglass lid. It goes inside the body of the feeder and pivots around a metal rod. The part is lightweight, easy to print, and…
The original gasket for the Surefeed MBOWL Stainless Steel Cup becomes brown and brittle over time losing the contact to the bowl. This model, printed out of TPU or TPE, can replace the old gasket. Because it fits tight over the bowls…
Replacement Battery Cover for: Surefeed Sealed Pet Bowl (Model: SPB) and Surefeed Microchip Pet Feeder (Model: MPF001) Designed to be printed on a FDM-Printer. (I will add more pictures ASAP)
This is a remix of SnowHead's Replacement Gasket for Surefeed MBOWL Stainless Steel Cup . The only difference is that the top of the gasket is 1mm higher, allowing for a closer seal when the lid closes. Needs to be printed in a flexible…
My cat is orange, and he was too scared and unsure of the door movement with my SurePet Microchip Feeder. The training mode moved the door too much for his liking, so I spent months trying to get him to eat from it to no avail. So I…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
Unfortunately my advwin base was different dimensions to the other options out there so have made my own with some amateur 3d modelling skills. I also added alternate connector slots on the base to allow the feeder to be placed to one…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
Remixed from @Tinker_O_Matic 's design, made the lip slightly longer so it would accommodate the 50/50 bowls better, sin
Stand for Surefeed bowls Printed in PETG with 3 walls and 5% infill.
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years. This part can replace this tappet making the bowl working again. For better stability and to prevent the need of…
If you have a SureFeed MPF001 and it runs its motor but can't lift its lid, you may need this part. Or maybe https://www.printables.com/model/209284-surefeed-mpf001-lid-opener-repair-part Open it up and take a look. I replaced the short…
This is a small replacement part designed for the SureFeed microchip cat feeder that props open the clear plexiglass lid. It goes inside the body of the feeder and pivots around a metal rod. The part is lightweight, easy to print, and…
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
I've created this stand to elevate the feeder a bit. My cat has acid reflux (renal issues) and it's important to not have the food too much lower than it's abdomen. It's not a perfect solution but it does work and he keeps eating from it.…
