Surefeed Pet Feeder Adjustable Stand (Modified)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of stands for the Surefeed Pet Feeder model MPF001
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 967
- Makes
- 5
- Views
- 3,473
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of tilting stands for the Surefeed Pet Feeder, model MPF001. It's a modification of Wolf_Jameson's Surefeed Pet Feeder Adjustable Stand, specifically his model 2 version. He used screws to install pins to hold the stands in place, but I simply merged the models so that the pins print as part of the stands and the screws aren't necessary.
I also shortened both lengths of the stands so that they would print in one piece on my Sovol bed and print faster.
Printed at .3 mm with 15% infill and organic supports on the bed.
Warning: People have mentioned online that there maybe be more than one model variation designated as MPF001. You might want to check the measurements to see if this will work with the holes in the bottom of your feeder before spending time and filament printing it.