Advwin 6L with camera automatic feeder and Surefeed combination
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed this design by Ana (and originally https://www.thingiverse.com/thing:6206548/files) to fit my advwin base
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Unfortunately my advwin base was different dimensions to the other options out there so have made my own with some amateur 3d modelling skills. I also added alternate connector slots on the base to allow the feeder to be placed to one side if using the 2 bowls for the surefeed feeder. (and also included a modded lid to allow the one side feeding). Also the angle of my slide must be slightly different so i had to make the hole bigger for the slide to work, and a new slide. Stuck the slide in with some VHB tape, and some gorilla glue to hold the lid of the slide on well
EDIT: Added ramp base model, this adds a 10degree tilt to the whole system, helps avoid build up of kibble right under the ramp. Also has two small holes for the “clips” that can just slot in, I had to print the clips at 95% for a good fit.
Not sure i can add much to the print tips, I don't really know how to change printer options much so basically just printed these in default. Follow Anas guide.