SureFeed microchip pet feeder shallow raised bowl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A half-cup shallow raised bowl for the SureFeed pet feeder
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 254
- Makes
- 2
- Views
- 2,457
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right?
Anyway, I am always happy to help. There was already a design on Thingiverse for her particular feeder, though that one had some printability issues. I modified it to raise the bottom a bit, aggressively slope the inside so that food falls to the center, and adjust the sides to that no supports are necessary to print it. This bowl fits half a cup of dry food.
If you need this very oddly specific bowl… I guess you are welcome.
You can use any print settings you'd like. I used 0.2mm layer height, and also 20% lightning infill.