SureFeed microchip pet feeder shallow raised bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A half-cup shallow raised bowl for the SureFeed pet feeder
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 249
- Wydruki
- 2
- Wyświetlenia
- 2422
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right?
Anyway, I am always happy to help. There was already a design on Thingiverse for her particular feeder, though that one had some printability issues. I modified it to raise the bottom a bit, aggressively slope the inside so that food falls to the center, and adjust the sides to that no supports are necessary to print it. This bowl fits half a cup of dry food.
If you need this very oddly specific bowl… I guess you are welcome.
You can use any print settings you'd like. I used 0.2mm layer height, and also 20% lightning infill.