Tires for Neato wheels for high pile carpet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tires for Neato wheels for high pile carpet
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
On carpets with higher pile the stock wheels and also the other tires I designed have not enough grip and causing wheelspin so.
So I designed a special profile for this carpet which will have much more grip there than the other profiles. A test was successful.
On hard floor these tires will produce a bit more noise than the stock wheels.
Edit 2020/12/19: Inspired by the remix by jlcornwell which needs support to can be printed I simply scaled my model down to 50% in height and print it twice. Mounted both parts shifted by a half tooth on the wheel the robot runs more smoothly on hard floors now. See last photo.
Print Settings
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament:
TPU white
Notes:
Recommended print settings:
Material: white or clear TPE or TPU with shore 85A or lower
Extruder temperature: 235°C
Print bed temperature: 80°C
Print speed: 25mm/s
Estimated print time per part: 1:30h
Material per part: ca. 15g
I printed direct to the glass plate without capton tape because on earlier tries the adhesion of the TPE on the tape was so strong that i lifted the tape from the glass plate when removing the parts.
How I Designed This
designed with FreeCAD
Category: Replacement Parts