Tires for Neato wheels for high pile carpet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tires for Neato wheels for high pile carpet
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
On carpets with higher pile the stock wheels and also the other tires I designed have not enough grip and causing wheelspin so.
So I designed a special profile for this carpet which will have much more grip there than the other profiles. A test was successful.
On hard floor these tires will produce a bit more noise than the stock wheels.
Edit 2020/12/19: Inspired by the remix by jlcornwell which needs support to can be printed I simply scaled my model down to 50% in height and print it twice. Mounted both parts shifted by a half tooth on the wheel the robot runs more smoothly on hard floors now. See last photo.
Print Settings
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament:
TPU white
Notes:
Recommended print settings:
Material: white or clear TPE or TPU with shore 85A or lower
Extruder temperature: 235°C
Print bed temperature: 80°C
Print speed: 25mm/s
Estimated print time per part: 1:30h
Material per part: ca. 15g
I printed direct to the glass plate without capton tape because on earlier tries the adhesion of the TPE on the tape was so strong that i lifted the tape from the glass plate when removing the parts.
How I Designed This
designed with FreeCAD
Category: Replacement Parts