Counting matching models…
Orthodontic aligners removal tool - Remover per allineatori ortodontici Now available in an enhanced ergonomic design for greater comfort and ease of use. New & Improved: Redesigned for better grip, smoother edges, and effortless aligner…
Update: I've added a version that includes grease channels to help retain more grease. This drive gear replacement for the Neato Botvac D7 is bolstered to ensure it is strong enough to withstand the forces the beaterbrush gives it. The…
After a few years of use the dustbin was not latching to the vacuum cleaner and this rendered the vacuum cleaner useless( sensor detects whether the dustbin is properly closed). At first glance the part could be glued, but this was only a…
I modeled this to replace the worn out hexagon portion of the Neato Botvac that seems to tear up on every vacuum. I printed mine no supports, but on a raft just to make sure the gear teeth came out clean. I have about 6 months of runtime…
Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5
My kid is super into Roomba and generally into all sorts of robot vacuums. There aren't many toys out there for him so I made him a little Neato inspired one. Print it at 50mm for a good pocketable size. Print at 200mm for a huge toy. Let…
The LIDAR unit salvaged from a Neato XV11 Robotic Vacuum Cleaner is a cheap LIDAR for robotics that reports accurate range information up to 3-5M in a continuous 360 Degree scan. This is a stand to suit the XV11 Lidar and has primarily…
Orthodontic aligners removal tool - KIDS LINE Key Features: New & Improved: Redesigned for better grip, smoother edges, and effortless aligner removal. For continuous use, it is preferable to use an antibacterial filament. For single-use…
Français : Roulette de brosse pour aspirateur robot Neato. Imprimer en TPU pour réduire le bruit ou en Nylon pour réduire le bruit et augmenté la résistance, sinon du PLA, PETG ou ABS font très bien l'affaire (Eviter les filament enrichie…
When printing the rims by xecutor why not print the tires too? Because my VR100 has lost a lot of his tires profile and got more and more problems on carpets and door sills I designed at first a tire with a profile similar to the original…
Français : Roulette arrière pour aspirateur robot Neato. Imprimer en TPU pour réduire le bruit ou en Nylon pour réduire le bruit et augmenté la résistance, sinon du PLA, PETG ou ABS font très bien l'affaire (Eviter les filament enrichie…
Because the original rear wheels of Neato and VR100 are very hard they make a big noise on tiled floor crossing the gaps between the tiles. If you print the attached file with white TPE and replace the hard wheels with the new ones, you…
Since Neato servers are off, you can use your robot vacum only by using a physical buton and it's functionality is limited. Then this Neato Brainslug mod comes to the rescue (big thanks for the creator, you did great work!):…
The dirtbin by LazyOdin fits perfect in my VR100 robot but looks a bit strange. That's why I added a lid to cover the whole bin bay. Like the source by LazyOdin it also uses the roomba 880/900 dirt bin filter. Edit: After four months of…
It's a remix of the original with no support needed. https://www.tinkercad.com/things/fxlI4BvneEF/ Category: Household Supplies
This latch solves the issue by forcing the lid shut. Put a tape on top of the flat surface if it is not tight enough.
Motivation I wanted to securely mount my Seeed Studio XIAO ESP32C3 to my Neato D7 so I could install OpenNeato and route the UART Dupont cables cleanly without interference. Solution Design and print a custom mount that achieves the…
I really liked the original, there were only 2 things I changed: I turned the designs 180 degrees so it's much easier to print The squares with rounded corners do look really nice, but my printer was not happy with it. So I made the holes…
Description Neato Intake and dustbin holder spare part. Made this from measurements of original part. Some differences exists but its mostly the same. Print instructions I printed this in PETG Prusament and have not had issues (yet) with…
A vacuum robot is a great thing and ours is so flat, it can even go under the couch. Unfortunately it won't find its way out and will get stuck, so I had to design an extension to the turret, so the safety switch will tell it to turn…
On carpets with higher pile the stock wheels and also the other tires I designed have not enough grip and causing wheelspin so. So I designed a special profile for this carpet which will have much more grip there than the other profiles.…
During operation of the botvac, dust accumulates in the filter and ultimately blocks the air flow. The filter is waste and must be replaced. Using the adapter and a hoover, the dust can be sucked out of the filter, thus extending its…
Because xecutor was so kind to attach his OpenScad-File of his wheel I was able to modify this wheel (even if I'm not so familiar with OpenScad). It now can be mounted on Vorwerks VR100 in the same direction like the original wheel,…
Our Neato VX Signature Pro vacuum occasionally hits a floor transition (or kid toy) hard enough that the dirt bin pops out. It would then sit and do nothing until someone pushed the bin back in. 3D printing to the rescue!! This little…
The stock side brush belt of the VR100 and Neato vacuum cleaner robots tears off after about two years. This part can replace the defective belt. Printed with printable rubber the belt will never rip again. Print Settings Printer Brand:…
This is just a small leaver to help pop-out the filter in the dust bin. Hope you like it! Print instructions Prints well in both PLA anf PETG
Français : C'est pince permettant de refermer les filtre des aspirateur Neato après nettoyage. En décollant le grillage pré-filtrant, on peut nettoyer le filtre papier correctement ce qui permet d'allonger sa duré de vie. English : It is…
I got an used VR100 as spare parts donor that was completely intact apart from a broken display and a the missing green handle that you need to lift the dustbin. So I re-created that little piece to complement the dustbin. Update: added a…
Riegel für den Neato XV Staubbehälter. Bei unserem "R2D2" ist beim überqueren von Hindernissen in der letzten Zeit immer wieder mal der Staubbehälter herausgesprungen. Das mag der Kleine leider gar nicht und stoppt sofort. Das…
Of course, cats are cute. But two of them with much, much fur killed my vacuum cleaner robot meanwhile three times. There is a constructive issue on the main brush motor. There is a wide gap between the motors case and the output drive…
This is a model I created many years ago. a few weeks ago, I decided to start revising the model into something new. this is the second revision of the model (first one on my profile) and it turned out greater than i expected. and the…
This axle is used on the drive wheels for an XV series robotic Vacuum and attaches the wheel to the drive assembly. You will need to find a small sheet metal screw and washer along with this to fully attach the wheel to the drive…
here is a revision of an old model i made. it has better printable parts, with a better fitting dust bin. many more revisions will be made later on so check out those in the future! warning: scaling the model may mess up how the dustbin…
Scanned using Creality CR-Scan Lizard. Note that this is not the whole D5, but rather the debug port & bumper, which is useful if making a custom PCBA for https://github.com/Philip2809/neato-connected
Planning a 1/32 single lane Rally track Monte Carlo Alpes Maritimes style, I was looking for landscaping models and "french balise de virage J1". Couldn't find it in 1:32 scale, so I decided to create my own. My first 3D model creation!…
My kid is super into Roomba and generally into all sorts of robot vacuums. There aren't many toys out there for him so I made him a little Neato inspired one. Print it at 50mm for a good pocketable size. Print at 200mm for a huge toy. Let…
Orthodontic aligners removal tool - KIDS LINE Key Features: New & Improved: Redesigned for better grip, smoother edges, and effortless aligner removal. For continuous use, it is preferable to use an antibacterial filament. For single-use…
My Neato D4 Latch broke, and I'm not paying $25 for a part that's designed to fail. So I made this quickly in Fusion 360. I used an M3x4mm heat insert and a small m3 screw. I used superglue to attach it to the vacuum. The heat insert I…
