1 / 6
French traffic delineator posts "Balise de virage J1" — image 1
1 / 6

French traffic delineator posts "Balise de virage J1"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made a french "balise de virage J1", which is warning in front of dangerous corners in France.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
29
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Public Domain

Planning a 1/32 single lane Rally track Monte Carlo Alpes Maritimes style, I was looking for landscaping models and "french balise de virage J1". Couldn't find it in 1:32 scale, so I decided to create my own.

My first 3D model creation!

Used 15mm cylinder pins with diameter of 1.5mm to put them to the ground in MDF (1.5mm drilled hole) with a plier. 

For reflection I used 5mm wide 3M silver reflection tape, found on ebay. 

Printed on Anycubic Kobra X with Anycubic Slicer Next and Anycubic PLA+ white. (Seems as there is no need to paint them).

Infill: 15%

Supports: NO (otherwise the ground hole for the pin is closed)

Best of luck 

Tags