French traffic delineator posts "Balise de virage J1"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a french "balise de virage J1", which is warning in front of dangerous corners in France.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
Planning a 1/32 single lane Rally track Monte Carlo Alpes Maritimes style, I was looking for landscaping models and "french balise de virage J1". Couldn't find it in 1:32 scale, so I decided to create my own.
My first 3D model creation!
Used 15mm cylinder pins with diameter of 1.5mm to put them to the ground in MDF (1.5mm drilled hole) with a plier.
For reflection I used 5mm wide 3M silver reflection tape, found on ebay.
Printed on Anycubic Kobra X with Anycubic Slicer Next and Anycubic PLA+ white. (Seems as there is no need to paint them).
Infill: 15%
Supports: NO (otherwise the ground hole for the pin is closed)
Best of luck