Magnetic scuba octopus holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic holder for your octo(pus)/backup regulator.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A magnetic octopus/backup regulator holder that can be attached to the hose.
The original holder that I had started to rust after a few dives, because the magnets on that holder were exposed and got damaged quite easily.
It has enough holding force to keep it from detaching while walking, but still easy enough to pull apart if needed.
In this design the magnets are embedded in the print, protecting them from damages.
Orient the Top and Hose past is such a way that the magnets are as close to the bed as possible (preferably a magnetic/steel sheet) to prevent it from sticking to the hot-end. Add a pause in your slicer software to be able to insert the magnet (BOTH parts need a magnet).
The model is designed for 10x5mm magnets like these: https://www.supermagnete.nl/schijfmagneten-neodymium/schijfmagneet-10mm-5mm_S-10-05-N52N