1 / 4
Skadis Sony LinkBuds S case holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis mount for Sony LinkBuds S case – snug fit, stable, one-hand removal
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A Sony LinkBuds S case holder designed for the Ikea Skadis pegboard. The case sits snugly but can still be removed with one hand. The holder itself locks tightly into the board – you’ll need to push it in a bit during installation, but once in place it stays firm.
Features:
- Snug fit for the case – secure yet easy to remove with one hand,
- Holder clips tightly into the Skadis board, requires slight pressure to insert,
- Clean and simple storage solution for your desk or wall setup.
Print settings (tested):
- Material: PLA or PETG (both should work),
- Supports: required,
- Walls: 3,
- Top/Bottom layers: 4,
- Layer height: 0.2 mm,
- Line width: 0.42 mm (standard),
- Infill: gyroid, 15 %,
- Weight including supports: under 12 g.
For OrcaSlicer users: I recommend setting Walls print order = Inner/Outer/Inner for more accurate dimensions.