1 / 3
Magnetic Kallax display plexiglass window
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create a magnetic attachable window using 2-pieces for each corner.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Inspired by @SierraGolf solution Kallax Display i decided to come up with a different version without screws and using TPU for the corners because i had problems with fitting other solutions.
Parts needed for each window:
- plexiglass 333mm x 333mm x 2 mm
- 8 magnets 6mm x 2mm
- double sided tape
Includes:
- magnet corner
- rounded magnet corner
- window corner
- window corner with pulltab
Printing:
- no supports needed
- print the window corners in TPU for easy fitting
- print the magnet corners in PLA or PETG
Assembly:
- attach the magnets to the magnet corners using glue or soldering iron
- insert the window corners on the plexiglass (no need to glue)
- glue the magnets to the window corners (with or without pull tabs)
- stick the magnet corners to the Kallax using double-sided tape
Notes:
- careful with magnet orientation ;)
- might work better with slightly shorter plexiglass <333mm