Creality 8mm rod enclosure - hygrometer mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a hygrometer/themometer in my enclosure for the 8mm rodded enclosure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
There are plenty of different mods for the larger creality tent enclosure, but the one I bought has 8mm rods and different connectors than most of the mods that have been desgned & uploaded.
I bought these hygrometer/thermometers and designed around these.
The design works by slipping onto the rod and then sliding the mount onto the centre connector snugly.
Worth pringing this on ABS or ASA just to be sure it survives a long time, but its not a critical part, so PETG might be fine.
This mod will allow you to mount onto any of the connector pieces, but for me the centre rear one made the most sence.
Post a make if you print one, I always like to see my designs being used.
Enjoy.