Tumble Dryer or air conditioner vent attachment 4"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attachment to go onto the end of 4" vent hose and then be clamped or hooked in place by a window or similar.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Window dryer vent adapter
I share this in case someone finds it useful.
This is a straightforward tumble dryer hose attachment to allow it to be held by a window or similar.
It is designed with a 4" hose in mind (common on a tumble dryer, possibly also on some aircon).
It has a thread to hold in the tube. You may, or may not, find that it does actually hold the hose in as some hoses are quite flexible and tend to pull out easily. In my use of it, I used a bit of tape to hold it in because I wasn't confident it would hold longer term.
I printed it in PETG with the external vent (not the round hose entry) on the build plate, with no supports necessary.
It solved a specific problem for me but no guarantees offered that it will meet your need (sounds a bit glass half empty… but you know what I mean :-) )