1 / 1
Print-around house for Xiaomi BLE sensor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will let you use your Xiaomi BLE sensor in special environments.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm using this in my pool, which has chlorine water. If you plan to use it in similar place you need to pay attention to a few things:
- Needs to be printed with a Chlorine water resistant filament. That's mostly PP.
- Needs 5 walls+bottom+top surfaces and tuned in profile for water tightness.
- I printed this without enclosure, to do that:
- First printed 3 layers of PETG raft
- Set raft-model interface to 0 or even less. PP needs to be squished inside the raft holes to keep sticking and prevent warping
- Of course you'll need an additional pause before the bridge starts at the top to insert the sensor