Liczymy pasujące modele…
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
Designed with a spring-loaded snap mechanism , it allows quick access while keeping cables securely in place. Function The mount features 5 slots , each suitable for cables up to Ø7 mm . To open the mount: Press the textured side outward…
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
Intro A tiny but incredibly handy bit driver designed to go everywhere with you. This latest V2 update improves grip and usability while keeping the tool ultra-compact . Whether you’re fixing small gadgets, tightening electronics, or just…
DungeonStick Church or Cathedral setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Use the included couplers to create a symmetrical build. Functional doors (print in place). Give them…
Waterproof (when using a silicone seal) Without nuts (tapered holes) Inside the mounting posts Variant hinge/clip only Need only M3x 30mm screw, twice for each clip Also published here
This model is compatible with the lego system.
Description : Bacs de rangement empilable Conçu pour être un compromis entre la robustesse et la rapidité d'impression Dimensions (L x l) : 10cm x 8cm 6 modèles disponibles : Bac simple 4 cm de hauteur Bac simple 6 cm de hauteur Bac…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
Spiralised bauble that i modelled on Fusion360. The hook is universal with my other Christmas models, and it should just click on but sometime a bit of glue and/or sanding may be necessary depending on your printer's quality. I recommend…
I made 3D model of the traditional thimble used by our grandma.
Summary This is a model of a 1965 Lincoln Continental Convertible Limousine in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels…
Battery holder/frame for battery packs. The parameters in the OnShape document can be changed to fit any battery type and any number of rows and columns. Included stl files for a few configurations for 18650 batteries: 2x6 2x8 2x10 3x3…
3D Print your own hulk today!!! Happy Printing! Please enable tree supports!
3D Printed print bed scraper tools are great, they don't damage the print surface, are safer to use, and can be produced when needed! The drawbacks are that plastic blades are much less durable than metal ones, and printing a complete…
Marble Run Remixed from the awesome design of FlyingPurpleCow I made some new elements. I'll probably add some more. The mounting peg is ten-sided so you can get about 6 different usable angles and hold snuggly to the peg board. You add…
I lost my adapterplate for my old tripod. Before throwing the tripod away, I started to experiment with OpenSCAD and it turned out to be pretty usable. With the included OpenSCAD-files you can design an adaptermount for your own tripod.…
This is a rugged, 20cm diameter loop designed for high-speed stunts and aggressive play. It features an extra-thick base for superior stability, ensuring the track doesn't tip or wobble when cars hit the apex. Key Features: Large…
Looking at all the other ammo boxes around I did not find anything I liked. Either they used square holes, limiting how much they held, or they were an odd size that didn't fit my ammo cans... So I just made my own. I targeted the 3 types…
Planter - Blobs stacked (scale-able) A modern planter design with stacked blobs. Planter is watertight! The inner blob structure is only in the last 3 rows for faster printing. I uploaded one size but it's easy to scale to your wishes:…
Phone not charging anymore or cable falling out? Stop struggling with toothpicks or metal needles that can damage the delicate pins inside your phone. This customizable parametric port cleaner generator lets you create the perfect, safe…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) TRAVELLER SCREW CAP BOX –…
It's just a double spinner — make sure the print bed is clean before starting the print. Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
This is a 2x1 Gridfinity bin with cutouts to hold two Flashforge AD5X nozzles - and two lid options. Thanks to Chir and Jimoreno for the original designs.
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
just scale to your desire and print.
This box is stackable and suitable for small items.
Do you have a mess of cables behind your desk, do you not want to screw or glue cable clips to your desk, well then this parametric cable clip is perfect for you, dimensions can be changed in the parameters menu to make a clip just for…
About I needed non-stackable version of Stackable SSD Case for Intel NUC , so I remixed it: this was designed and tested for D34010WYK model only much easier to mount SSD disk reuse original bottom part with the rubber feet - also cutouts…
Parts: Ball bearings: 8-10 x 5.5mm (7/32in) Only required for enabling spool rotation. Printing: No supports needed. Files are provided in the correct printing orientation. Assembly: Print Swivel Piece 1 & 2. Place the ball bearings in…
TPU95A Füllung 20% Schichthöhe 0,3mm mit zum Teil Aufmalstützen, ohne Rand
Just a remix of the dispenser - the rest is still the same, use the original thing to get the rest of the organizer. The "pin" setup was too tough for me to get right (the pins would droop and not fit, etc) so I added some depressions for…
I've teste this model on most desks and tables and it has worked quite well, as long as the hanging surface isn't too thick it'll work just fine, I plan on making a second version with more tools attached: keychain friendly, bottle…
A fully parametric OpenSCAD reducer designed to connect a ~4" duct to a ~2.5" outlet. I built this to adapt the exhaust from a Creality Falcon A1 (~60 mm ID) to an AC Infinity inline fan (~102–103 mm ID). The model uses matched…
Part of my strap designing, I had the idea of this being printed in TPU. It worked great as a 'hinge' to keep a storage box from getting misplaced.
A Heart shaped cable tie that i made to help keep cables tidy instead of being loose in a drawer. In the photos I am using the 7.4cm long cable tie printed in TPU on a stock Ender 5 pro
ive made some marble holders. theyre for really big art marbles but i guess they will hold anything thats spherical and 1.5-2.5". the french press looking one needs supports, the balls one might? i never ended up using balls for anything.
Description I made these boxes to store cards for the splendid "Nat's what I reckon - YEAH NAH board game, but they are easily adapted to suit any other game. You can find files for the game TOKENS on the attached .3mf file or download…
My mailbox accumulates water at the bottom when it rains or is humid outside, which will damage my mail. So I designed this grid to fit at the bottom of my mailbox that will raise the mail from the humidity. This is a customizable…
It is a short marble run powered by turning the wheel.
I need 10cc measuring spoon for fertilizer with density of 1.0 - 10cc for 10g that is good for my planters. There are several measuring spoons on the net but most of them are for old openscad and didn't work for me. So I made one that is…
This 3D model is designed as a replacement part for the end cap of a cylindrical, hollow table leg, compatible with Ikea furniture. The end cap is precisely crafted to fit snugly into the inner diameter of the hollow table leg, providing…
Designed this quick model to be able to remove/reinstall the bushing in the top of Redding reloading presses without having to go out and purchase a very large socket. I recommend printing in a more rigid-material as they can take a…
Window hanging bird table. Gives you an amazing view of your local birds feeding right at your window! Perfect for taking beautiful photographs. Only the two main pieces are required (FeederTable and WindowHanger) as the main table is…
Pipe band clamp - Parametric - not particularly strong with most extruded materials. A secondary clamp may be integrated making it useful as a lab retort clamp. Highly customizable - Pipe Diameter, regular Pipe Cross section, height, wall…
If you want to use these parts, I recommend also printing these other parts that were created by DAL: Adaptable superior anti-wooble: http://www.thingiverse.com/thing:1240175 top guide threaded rod:…
Previous models people have “drilled” into the case to run wires wherever they may. That seems unfinished to me and I do not want a loop of wires hanging out the side or wrapping around. -Supports 100% of the time ONLY for the OLED…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones were way to narrow. Added cut-outs for less material use to the main body. Made the clip more flexible and replaceable, because mine…
Some Boxes that can be stacked vertically. Short and Tall Sizes Small Box Dimensions: 140mm wide x 120mm deep x 65mm tall Large Box Dimensions: 140mm wide x 120mm deep x 100mm tall They look great with fuzzy skin enabled. I printed with…
A step-eliminating slope for overcoming three door rails. It has a total length of 40 cm and can be connected. This slope can be used when the rail spacing is 2.1 cm. I will upload a Fusion 360 file, so feel free to customize it. The…
This 3D-printed Tabletop RPG Counter is a practical and customizable tool for tracking life, stamina, mana, spell points, or any resource used in your RPG sessions. Designed for tabletop players who want clarity and convenience, this…
I made this model because I wanted a way to show my interest in 3D printing without buying a shirt from a This is a 3D printable nozzle-style necklace designed for people who want to show their interest in 3D printing without wearing…
Customizable tray with lighting, adaptable to your needs. With integrated LED lamp. Since the inner base is customizable, you can: Use the included decorative lids. Design your own bases with your preferred theme. (One base is plain so…
Diese Schutzbügel ist für die Verlegung von Solarkabel über scharfe Kanten von Blech-Dächer gedacht. Damit wird verhindert, dass die Kabel durch die scharfen Kanten beschädigt werden. Es sind 2 Durchlässe für Kabelbinder vorhanden, damit…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Stackable Bin for IKEA Alex Drawer A storage bin designed for the IKEA ALEX drawer, printed as a single piece: no assembly, no glue, and no supports needed. Light yet sturdy : only 264 g, while staying strong Easy to print : one piece, no…
Simple wall mounted hanger for audio jack cables (1/4 inch, 6.3mm).
This model is compatible with the lego system.
The Stand This foldable book stand is designed to make learning more comfortable and use desk space more efficiently. The design in question, went through multiple iterations. This final version is robust and stable enough to even hold…
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
This model is compatible with the lego system.
"Discover our stunning collection of sleek and stylish round vases, available in three different sizes. Elevate any space with their contemporary design. Check out our profile for more household items."
"Discover our stunning collection of sleek and stylish round vases, available in three different sizes. Elevate any space with their contemporary design. Check out our profile for more household items."
"Discover our stunning collection of sleek and stylish oval vases, available in three different sizes. Elevate any space with their contemporary design. Check out our profile for more household items."
Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…
Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…
I have printed all of these at .2 or .15 mm in PETG. Worked well in operation.
Designed to help with soldering for the TRRS 3.5mm jack motherboard. Made to help with build a Variable Openmod Part 3. This is a tool to help soldering 3 wires into one for ground. And a tool to help hold wires when soldering into a TRRS…
I needed a larger Container for my Senseo Coffee Pads because I mostly buy the 40 piece packs. This Container will exactly hold 40 Coffee Pads. i made 2 versions: one with a place to put a 'nametag' so you don't forget what Pads are in…
I sculpted this body to be a body compatible with smart doll heads, specifically meant to resemble a trans masculine person, because that's a representation I don't see a lot in the bjd hobby. This is the first body I've sculpted and so…
I like those stackable boxes, but some times I want them to have more separate chambers so I made this separator wall! The title picture included a set of hex keys for size reference. Just print it in the default orientation, no support…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This "come-along winch" from Menards has a two-to-one reduction pulley. The cable can jump the sheive and get jammed against the side wall. The spacers take up the excess space, keeping the cable on the sheive. I used PETG because it is…
DEMON SLAYER FANDOM: Add some Demon Slayer flair Category: 2D Art
![Customizable port cleaner [Generator]](https://media.printables.com/media/prints/51b4adbb-46b9-41db-a7c0-f78a5d832e43/images/12362630_214742d5-0ac3-446e-aae6-5a5ec3f5873f_d2e1fe2a-28fa-4493-b598-11977d244642/create_a_43_image_in_the_style_of_the_spool_photo__delpmaspu-2.png)
![Stackable Bin for IKEA Alex Drawer [big printer]](https://media.printables.com/media/prints/fb013f45-d611-480c-a1e4-3ea138246999/images/14260152_f84155e9-fcb0-4883-9e0c-9ad147c770c8_04cd64f2-19db-4819-9ed7-bd4322566966/photo_1_2026-10-27_22-57-06.jpg)
