1 / 1
Window Seal for 3-inch exhaust duct - short funnel & 115mm height — zdjęcie 1

Window Seal for 3-inch exhaust duct - short funnel & 115mm height

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shorter neck/funnel area for tight clearance in workspace. Had to raise height by 15 mm to clear lip on my window.

Ocena
0 / 5
Polubienia
7
Pobrania
67
Wydruki
0
Wyświetlenia
451
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model works with Rick Tucker's system and is primarily a remix of Joshua Wentworth's Window Seal for 3-Inch Exhaust Duct. 

I made the funnel / throat portion take up much less depth. 35mm total from the face of the filler board, vs 90 mm in the original. Due to the more aggressive taper, I needed to raise the height of the filler panels by 15 mm to clear the lip on my window. 

All panel widths and 3in short neck funnel panel have been included. Follow the instructions on Rick Tucker's model for assembly. 

This is my first model that I've remixed in Fusion360 so please bear with me as I'm still learning. It's not the best model for 3d printing. I also understand that the aggressive taper is not great for resistance. I'm hoping the exhaust fan in my Centauri Carbon can overcome that resistance so I can print ABS & ASA in my home office. 

Tagi