Window Seal for 3-inch exhaust duct - short funnel & 115mm height
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shorter neck/funnel area for tight clearance in workspace. Had to raise height by 15 mm to clear lip on my window.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 67
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model works with Rick Tucker's system and is primarily a remix of Joshua Wentworth's Window Seal for 3-Inch Exhaust Duct.
I made the funnel / throat portion take up much less depth. 35mm total from the face of the filler board, vs 90 mm in the original. Due to the more aggressive taper, I needed to raise the height of the filler panels by 15 mm to clear the lip on my window.
All panel widths and 3in short neck funnel panel have been included. Follow the instructions on Rick Tucker's model for assembly.
This is my first model that I've remixed in Fusion360 so please bear with me as I'm still learning. It's not the best model for 3d printing. I also understand that the aggressive taper is not great for resistance. I'm hoping the exhaust fan in my Centauri Carbon can overcome that resistance so I can print ABS & ASA in my home office.