1 / 5
XL Nozzle Replacement Tool for Livius's XL Fan Shroud 360 — zdjęcie 1
1 / 5

XL Nozzle Replacement Tool for Livius's XL Fan Shroud 360

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

XL Nozzle replacement tool which works with the Livius Fan Shroud 360 design.

Ocena
4,4 / 5
Polubienia
20
Pobrania
77
Wydruki
4
Wyświetlenia
408
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I really liked the Fan Shroud 360 that Livius designed for the XL, but I also wanted a nozzle replacement tool that would work with this design. I also liked the XL Nozzle Replacement Tool for the Prusa XL Fan Shroud Mod that David Kingsman designed, but it would not work with Fan Shroud 360 so I remixed it.

The Fan Shroud 360 fits tightly around the XL heater block so the replacement tool needed to work within those constraints. I use a silicon sock on all of my heater blocks and one will fit on the XL with the Fan Shroud 360 in place, but there is almost no clearance between the shroud and the heater block with the sock on. Because of this, if you use a silicon sock like I do, you'll have to remove it before and reinstall it after replacing a nozzle.

I printed this on my CORE One in Prusament PETG at 0.2mm layer height using organic supports. The tool was designed to “snap” into place securely holding the heater block during the nozzle replacement process. To “unsnap” the tool when the process is completed you simply need to press the lever on the side of the tool to release it.

I hope you find this a useful addition to your XL tool kit.

Tagi