FSA MegaExo Crankset Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable alternative for the tool: MegaExo Crank Bolt Extractor | SKU:390-2099
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Print Recommendations: (what worked for me)
Material: PETG-8% CF
Wall Loops: 3
Infill: 15% Gyroid
Layer Height: 0.16mm
Additional Parts:
- 6x 2mm Steel pins
- Length recommend: 12mm (see note)
Note:
I used 12mm long pins. I have provided stl's for additional common pin lengths (8,10,12,14). Step file is for the 12 mm variant-- edit as needed. In my experience, you can get away with only using 4 pins.
Use:
- External Socket: 24mm
- Internal Socket: 10mm (clears 8mm key needed for crank)
Personal:
Worked for FSA Omega Modular AGX+crankset. If you're just gathering up tools you think you'll need: you can probably get away without this tool. The 8mm keyed bolt on the crank pushed against the retainer casing this tool is for-- it is more for assembly / troubleshooting the crank removal.