Liczymy pasujące modele…
This bicycle chain/crankset cover guard works on any bike whose screws are squarely located 100mm apart from one another. I use it on a Specialized Rockhopper 29.
I created this for my bike with a SR-Suntour XCT V2 48/38/28 Crankset. The holes for attaching the chainguard are 110mm and 120mm apart. You will need 4 around 5-8 mm long M4 screws with countersunk or very flat heads. I already printed…
My new CUES crank didn't come with a chainguard, this design fits just right. Feel free to adapt to more Cranksets, or let me know the hole spacing of the other CUES cranks! Designed around the cheap heatset inserts, files provided for M4…
I gout a touring bike that i use for daily commute. It is comfy and quick but few times I got stain on my jeans. I removed the original plastic piece and designed this. Warning: If you remove the original plastic peice from the crankset,…
peça para apertar parafuso e rolamento da pedaleira tipo bb51 Ainda não foi impressa a peça english version (google translate) piece to tighten screw and bearing bracket bb51 It has not yet been printed piece Category: Hand Tools
Can effectively prevent dust, dirt and rain water into the hole to get rusty. Size: 27mm x 8mm Inner diameter: 20mm
decathlon not have parts for theyown stuffs so i print my own guard. Ref. : 968556 Square-shaft transmission, 7-9 speeds
Simple chain catcher that prevents bicycle chain from falling inwards towards the bottom bracket. This was designed for a Look 795 Blade with a Shimano Ultegra R8000 derailleur and crankset, so you may have to modify the model to fit the…
Garde-chaîne pour pédalier Shimano GRX FC-RX820-1 (38T à 50T) (Testé uniquement avec le modèle 40T) 31.05.2026 : Ajout des modèles de garde-chaînes pour 38T, 40T, 42T, 44T, 46T, 48T et 50T (nouvelle version) Paramètres d'impression : PLA…
The Y1MD14100 spacer that comes with the FC-M6120 is a tad too large in diameter if you're pairing it with a higher-end, XT level BB-MT800/BB-MT801 bottom bracket. Instead of that, you need a Y1PW98070, the stuff that comes with the XT…
basically it is an alternative to EAN-GTIN 8590831431217 I needed to remove a GIANT Bicycle crankset / camshaft It uses the same nut as some freewheels with 4-notch pro tip: don't use pla it is to weak trust me i tried
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
I found Bash Ring for Shimano FC-5100 Crankset (32t) by i32 ( https://www.thingiverse.com/thing:6905994 ). but it didn’t work with my 30T chainring. This is inspired by that, but I changed diameters, and thickness, removed material around…
I bought a Varstrom/Bafang ebike conversion kit from the 'zon and needed the right PAS sensor because my bike has external bottom bracket bearings. The kit came with almost no instructions. The instructions for the PAS magnet ring were…
Print Recommendations: (what worked for me) Material: PETG-8% CF Wall Loops: 3 Infill: 15% Gyroid Layer Height: 0.16mm Additional Parts: 6x 2mm Steel pins Length recommend: 12mm (see note) Note: I used 12mm long pins. I have provided…
It serves a dual purpose: it acts as a dust and dirt plug to keep the hollow spindle clean, while discreetly housing an Apple AirTag or Novoo tracker inside for hidden bicycle tracking. The two-piece design secures safely inside the…
a single chainring with cranks and pedals
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
I designed this crank ring protector for my Torpado MTB Chiron 27,5'' as the original part broke. The distance between the screw holes is 88mm, so check your bike for compatibility. So many bikes have the chainring guard protector missing…
Bike chain protection for crankset Prowheel Suolo 22/32/44Т.
I designed this to fit my 5 screw bike, to be printed in 5 parts, since the whole won't fit on a Mini print bed. I used stainless M4 countersunk socket head screws and matching M4 nuts. The Onshape CAD drawing is parametric, so should be…
Crankset keychain modelled off a 110BCD THM Clavicula crankset. 30% of life size. Paired with 25mm keyring in pictures.
When renovating a bike equipped with an FSA Gossamer crankset, I decided to protect the crankset from accidental impacts, such as hitting the curb while walking the bike. The guard needs to be printed with TPU using supports.
plug to close this hole in this crankset from mud/dust ect
