1 / 4
Chain Guard for SR-Suntour XCT V2 48/38/28 Crankset
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this for my bike with a SR-Suntour XCT V2 48/38/28 Crankset. The holes for attaching the chainguard are…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 685
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I created this for my bike with a SR-Suntour XCT V2 48/38/28 Crankset.
The holes for attaching the chainguard are 110mm and 120mm apart.
You will need 4 around 5-8 mm long M4 screws with countersunk or very flat heads.
I already printed this and installed it on the bike.
It fits perfectly. I can't tell yet how durable it is though.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
30%
Category: Sport & Outdoors