1 / 2
S.T.E.R.I.L.I.T.E: Sealed Thermal Environment for Reliable Insulation of Low-moisture, Industrious Thread Extrusion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lid-down type drybox system for Sterilite 19L containers: 1. Spool holder 2. Hygro & desi holder 3. Biger desi holder
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I built my own enclosure for my ender 3, but wanted a drybox extruder, I liked the price, availability and size of the sertilite 20l/q gasketed box.
- This system is meant to rest with the lid down on top of an enclosure or desktop
- I used 8mm aluminum tubing I had laying around to connect both ends of the spool holder, you can use wooden dowels or threaded rod too!
- I remixed the sterilite hygrometer hanger remix and lengthened the rail to accommodate a desiccant cartridge
- Slim w/ hygrometer & Thick desiccant containers!
- The desiccant containers was designed to provide maximum surface area exposure. (dropped humidity in the container from 60% to 10% within 24hours! YMMV)
- Printed on an Ender 3 in PLA
- If your printer bed is too small, split em up and join with some superglue!
Enjoy!