Generic USB Shifter Sequential Mode Changer (For Hall Effect Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of maplebaconjulio's design to resolve some that I faced with a metal shifter top plate.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
For best results I have found printing the top on the bed however this highly depends on how dialed in your support structures are, if it is too hard to remove please refer to maplebaconjulio's preferred printing orientation. (Cut out facing up)
Please visit the original model made by maplebaconjulio on Thingiverse
Repeat of change list from remix section.
"1 - Created draft angled on the top plate to reduce contact when shifting up+down. [Image Ref: 2,3]
2 - Created a “valley” that the clip can be used with shifter that have metal top plates. [Image Ref: 1]
3 - Reduced the distance between the magnets and ends. (Did not work with mine) [Image Ref: 4,5]"