(WIP) Bloodborne Rakuyo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Currently a work-in-progress functioning Rakuyo from Bloodborne. Now you can be Lady Maria.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I got really bored and decided to make a functioning Rakuyo for my own amusement and just to have. Currently a work in progress as I only have the basic dagger prototype done and am finishing the saber part. Not many details yet as I still need to spice it up in Blender. I'm using Onshape for this. But if you're looking for a FREE Rakuyo model to print, I'm trying. It will be done eventually.
Notes:
I plan to stick a 5/16 dowel through the saber's blade.
I'm using two 8mmX4mm magnets to keep the two swords together. So far the magnets fit. Will they actually hold the two weapons together? Don't know I'm getting there. Will probably print the dagger with low infill. Or try a different magnet system if it doesn't work.
I have 0.005in tolerances on all bits that are supposed to get glued together. 0.005 has worked in the past with my Ender-3. There is a 0.01in tolerance for where the dagger slides into the handle of the saber.
To print the blade, you'll have to cut it into halves or thirds.