Liczymy pasujące modele…
3 Part Celestial Dial Pendant from Bloodborne. Modelled at 10cm diameter. Probably will turn out better with a resin printer but I printed this with ULTRADETAIL setting in prusaslicer and it turned out nice.
Happy Halloween! One of my favorite games as of late has been the RPG Bloodborne. 7 years later, and it still holds up. I love the Gothic atmosphere of the game, the challenging gameplay, and more pertinent to my little hobby here, the…
This is a big, big boy. When I modeled The One Reborn, I was taken by surprise that I would need a gargantuan base of 8 inches in diameter to truly capture the scale of that creature. When I made the Amygdala however, I KNEW I would need…
Yeah. Kind of getting out of hand now.
A keychain of the Hunter's Mark from Bloodborne made by From Software
This model was right at the top of my list for a while now. While the Orphan of Kos is a much harder final boss than this guy, the Moon Presence wins in terms of visual appeal. I went into this project thinking it was going to be an easy…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
You are in for a real treat. I've been on a modeling binge, and that is mostly in preparation for something special I'm doing this October. Modeling the Cleric Beast was part of that. This model actually turned out much easier than I…
Happy Halloween! Well, it's finally over. My last boss from Bloodborne: The Old Hunters, and my most favorite out of all of them, is the grotesque man-horse Ludwig. This wasn't my most challenging sculpt out of the five, that honor goes…
"A corpse should be left well enough alone." Out of all the five bosses from the DLC, I think Lady Maria was the most challenging to sculpt. It's simply the level of detail in her clothing that did it. Unfortunately the last week for me…
With the release of the Huntsman models, I realized I should step outside my comfort zone and start modeling enemies with clothes. This is especially true if I want to do Bloodborne bosses such as Micolash, Lady Maria and Gehrman…
Yay! First model of the new year! I was working on this one since late December, and I think it turned out pretty good. The reason why it took so long to release is mostly because I ran out of resin, and had to wait for more. However,…
This project was a long time coming. I've been working on this series of miniatures for what feels like months, I started on these even before I worked on the Camp Clearwater miniatures. Part of what took them so long was creating three…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
This chaotic CatDog collection of corpses is freakin' MASSIVE! I actually enjoy this streak of Bloodborne characters that I'm doing, so I figured I'd get one of the harder ones done and over with. The One Reborn has similar concepts from…
And the Bloodborne characters just keep on coming! This is probably going to be a pattern from now on, modeling these characters is just too dang fun! The Snatcher, or Kidnapper as they are also known is a enemy in the game that really…
Align, sandwich, and glue three parts, you're good to go. You can hang it or snap a 15mm magnet at back to attach anywhere u want. I was giving it out for free on Katsu, but every hoonter should have one.
Insert pro deskovou hru Bloodborne verze 2 (drobné úpravy) i pro figurky.
This was a super easy one. I looked forward to modeling this creature from Bloodborne for quite some time, not only did it have a super easy design to model, but the Celestial Emissary is simply a larger version of the regular minions. I…
Ah, Kos, or as some say, Kosm. You and your poor wizened child were an interesting sculpt. My penultimate release of Bloodborne DLC bosses is the final one in the game. The Orphan of Kos, despite being a medium-sized creature, is a fast…
This was a predictably easy one, but not without its challenges. While modeling the main body of this creature wasn't that hard, I ended up using blender's cloth simulation to make the creature's loose skin, which was only difficult…
Maybe I should've saved this one for Halloween. This model was actually being worked on before I switched my focus to the Camp Clearwater miniatures, but when I came back to it, I decided to try out a feature of Blender I haven't used in…
Here is my second The Old Hunters boss. Honestly, this character is the reason I was dragging my feet on modeling the standard Cleric Beast. When most Bloodborne players think of Laurence, they think "Cleric Beast, but he's on fire", and…
This guy was a really hard one to sculpt, I hope you like it. From a creature design standpoint, Darkbeast Paarl was one of my favorite bosses in the game. A skeletal werewolf that harnessed electrical power seemed like such a cool…
Wow, this is my 50th upload! In hindsight, I should've saved the Cleric Beast for that milestone. I have a huge project coming next month, but for now, I wanted to upload some of my smaller stuff. After I modeled all the Huntsman…
I have used gaussian splatting to create digital 3D model out of original figure for another boardgame.
This is just a placeholder for now. You’re free to download the STEP file, but fair warning—it might be confusing. The assembly requires additional parts for proper securing. I’ll share more details here when I have time (which won’t be…
It was surprising how much I struggled with this one. What made the brainsucker more difficult than I thought was the Cthulhu-like tentacles on its face. On the creature in game, they would have been way too thin to print properly, even…
Holy Kos, this one was hard, hard, HARD! I was super excited to do this one, Ebrietas was one of my favorite bosses in the game. I was expecting a challenge, I even knew ahead of time how I was going to tackle some of the more difficult…
Insert creepy singing here After sculpting Vicar Amelia, I was inspired to make miniatures of other Bloodborne characters, and the first one that came to mind was the Winter Lantern. This freakish thing drove players into a frenzy…
Happy October everyone! This Halloween, it will be one year since I started modeling Bloodborne stuff. I haven't even finished modeling all of the bosses yet, but I do have the rest planned. But for now, I'm turning my attention to…
Insert for the Bloodborne: The Board Game core/base box, sleeved with medium grade sleeves (Sleeve Kings). Sizes are in CM, so the slicer may ask you to auto-resize, just accept the prompt. Created with my insert generator using Blender's…
Not the original designer, reuploaded here for visibility. If you like the model please support the original author at the Thingiverse link below. A box organizer for Bloodborne: The Card Game by CMON. This is for the base game and The…
Modeling this creature was almost therapeutic in a way. After the long and complicated process of modeling Ebrietas, I needed something really simple. This was about as simple as you can get, modeling this creature was pretty much stress…
This one took longer to release than it should have. My apologies for the sparse updates, a lot of rl stuff has been getting in the way. Normally my creation process is switching back and forth between a boss from the game and a regular…
The boss Lady Maria, from Bloodborne. Generated in Midjourney Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Overture Black Transmission Distance: 0.6 PLA Overture Cement Gray…
Inserto preparado para que en la caja base queda todo el contenido del juego + la expansión de la pesadilla del cazador.
I almost forgot about this one in all the excitement. This was a model I planned to release last month, as it was a scary enemy in its own right. So much has been happening to me right now, I completely forgot about releasing this model…
Bloodborne Logo Frame Game. 0.2 Layer; Red and Black colors, single and dual print; No supports; No brim; 15% infill.
Dimensions (mm) : 27 x 46 x 126 I used around 16 grams of filament, supports must be enabled
I got really bored and decided to make a functioning Rakuyo for my own amusement and just to have. Currently a work in progress as I only have the basic dagger prototype done and am finishing the saber part. Not many details yet as I…
“...We are born of the blood, made men by the blood, undone by the blood. Our eyes are yet to open..." Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys,…
Dimensions (mm) : 12 x 107 x 177, I used around 23 grams of filament, supports must be enabled
I designed it as separate detail so there won't be any problem with floating regions and supports. It just clicks in place.
Detailed 3D printable Bloodborne Hunter figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
Detailed 3D printable Bloodborne Maria figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
HueForge made model of Bloodborne game inspired poster, found on Pinterest. For best results I advice to slow down your printer to 50%. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
Here's the unique component that I used to store Bloodborne with my BITS system! This is the last quadrant of my storage solution for this game, where I keep all of the tiles and long cards! There are 4 boxes for the tiles, I sorted them…
Dimensions (mm) : 39 x 38 x 177, I used around 15 grams of filament, Supports are NOT needed
RU Представляю вашему вниманию органайзер, позволяющий хранить весь вышедший контент для "Bloodborne. Настольная игра," включая бонусный контент в 5 больших коробках от базы и дополнений. Органайзер поддерживает хранение всех карт в…
This is a digital STL file - print-ready and high quality. > "A trick weapon typically used by Healing Church hunters. > It is said that the silver sword was employed by Ludwig, the first hunter of the Church. > When transformed, it…
HueForge made model of Bloodborne game inspired poster, found on Pinterest. For best results I advice to slow down your printer to 50%. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
This is a digital STL file - print-ready and high quality. > "A trick weapon typically used by Healing Church hunters. > It is said that the silver sword was employed by Ludwig, the first hunter of the Church." This model includes only…
This is a digital STL file - print-ready and high quality. > "A trick weapon typically used by Healing Church hunters. > It is said that the silver sword was employed by Ludwig, the first hunter of the Church. > When transformed, it…
This is a digital STL file - print-ready and high quality. > "A trick weapon typically used by Healing Church hunters. > On the one side, an easily handled silver sword. > On the other, a giant obtuse stone weapon, characterized by a…
