Bloodborne Eileen the Crow HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eileen the Crow - "Leave the hunting of hunters to me" HueForge
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge made model of Bloodborne game inspired poster, found on Pinterest.
For best results I advice to slow down your printer to 50%.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#101a1f PLA Jayo Black Transmission Distance: 0.1
#375167 PLA+ Sunlu Grey Transmission Distance: 1.9
#b12f18 PLA+ Gembird Red Transmission Distance: 2.3
#ff4d11 PLA+ Sunlu Red Transmission Distance: 5.6
#fffed4 PLA+ Sunlu Lemon Yellow Transmission Distance: 6.8
#ffffff PLA Gembird White Transmission Distance: 4.4
This print uses 6 unique filaments
Swap Instructions:
Start with Jayo Black
At layer #8 (0.72mm) swap to Sunlu Grey
At layer #11 (0.96mm) swap to Gembird Red
At layer #13 (1.12mm) swap to Sunlu Red
At layer #15 (1.28mm) swap to Sunlu Lemon Yellow
At layer #23 (1.92mm) swap to Gembird White for the rest.
Happy printing:)