Lady Maria - Bloodborne
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The character Lady Maria, from Bloodborne
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The boss Lady Maria, from Bloodborne. Generated in Midjourney
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 2.4
PLA Overture White Transmission Distance: 6.4
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Cement Gray
At layer #10 (0.88mm) swap to White for the rest.
It's 150x150mm, feel free to resize the X and Y but don't change the Z, that'll break it. You don't need an AMS/MMU for this print, you can do it all through filament swaps. You also don't need to own the HueForge software (tho I highly recommend getting it anyways! It's so fun)