Nintendo Switch Joycon Rifle / Gun / shotgun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This one is very rough and I had a few issues creating some parts of the model but if you follow the instructions it…
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 265
- Wydruki
- 0
- Wyświetlenia
- 4077
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This one is very rough and I had a few issues creating some parts of the model but if you follow the instructions it should print fine for you. I printed this on an Ender 3 v2 with the following Cura Settings:
Draft Quality (0.32mm)
Infill 10%
supports (touching plate) 20%
All three parts can fit onto the bed at once and took around 12 hours to print. I would print it with the 'controller catches' at the top, see my Cura picture for an example (rotate part 3 upside down / 180 degrees - sorry i didn't want to mess with it as it printed fine). Also Part 3 has a small issue and has an extra bit of material on that side which I could not remove for some reason (walls started to disappear). This means if you then try and print it there's a gap between it and the bed. To resolve this problem set the part to be -0.3mm on the Z axis (for that part only), so it's just under the bed and it will print fine.
Also because of the wall disappearing problem I got sick so the model does not clip together. All you need is a bit super glue to join the three parts together :)
I don't own any copyright, etc for Nintendo I am just a fan
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.32
Infill:
10
Post-Printing
Super glue it together!
How I Designed This
a few different programs
I mainly used MatterControl however I did put the model into Blender to do a few tweaks, but don't really know how to use it (next mission to learn it). Then as the model seemed to have a few issues I put it into 3d builder and clicked fix and it all turned out well..........
Any tips on what programs I should be using please let me know. I started to learn CorelCad 2019 however it keeps crashing on push/pull'sCategory: Toy & Game Accessories