LG Kompressor Vacuum Hose Nozzle Tip Replacement (VC73203UHAO and compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement nozzle tip for LG Kompressor vacuum hose (VC73203UHAO). Fixes broken brush attachment.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Replacement Nozzle Tip for LG Kompressor Vacuum Hose (Model: VC73203UHAO)
The Problem:
The original plastic nozzle tip on the vacuum hose is a common point of failure. It can snap off easily, making it impossible to attach the floor brush or other tools, rendering the vacuum much less useful.
The Solution:
This is a 3D-printed replacement part I designed in SolidWorks after my original tip broke. It is a direct 1:1 copy of the broken piece. I have successfully printed and installed it on my LG VC73203UHAO vacuum, and it works perfectly, providing a secure connection to the brush.
Compatibility:
Primary Model: LG Kompressor VC73203UHAO
Likely Compatible With: Other LG vacuum models that use the same hose and attachment system. It is recommended to compare the dimensions with your broken part before printing.
Printing Instructions:
Material: I used ABS for its durability and slight flexibility, which helps prevent snapping.
Infill: 20-30% (enough for strength without wasting material).
Supports: Not required. The model is oriented optimally for FDM printing.
Layer Height: 0.1mm standard quality is sufficient.
Note: Clean up any small strings after printing for a perfect fit.
Installation:
Simply push the new tip firmly into the end of the vacuum hose until it sits flush. It should click into place or feel very snug. Attach your brush to test the connection.
Disclaimer:
This model is provided for free "as is". I am not affiliated with LG. Print and use at your own risk.