Nextruder Nozzle Holder - Multibin Top

These are Multibin Tops to hold either three or seven Nextruder nozzles. 

They work with regular Prusa sized nozzles and the E3D high flow variants that have a slightly bigger head.

Because they are tightly nested in the holder, I did not add finger holes to get them out. Instead just press on the head to lift the end and grab that.

Additional Parts

Since these are only Multibin Tops you need extra parts. Please note that these links might get outdated if parts are updated on Thangs. Use the official Multiboard Parts Library to find the correct part then.

• To save material: 
  • 2x1 - Top Click Rim or 
  • 2x2 - Top Click Rim
• Alternatively: 
  • 2x1x0.5 CU - Bin - Multibin Insert
  • 2x2x0.5 CU - Bin - Multibin Insert

These then go into the corresponding shells:

• 2x1x0.5 CU- Topped Multipoint Rail - Multibin Shell
• 2x2x0.5 CU - Topped Multipoint Rail - Multibin Shell

The Top Click Rim variants can also be used in shells of lower heights. These are not stackable though - see the Printable's picture for an example.

• 2x1x0.25 CU - Simple Walls - Multibin Shell
• 2x2x0.25 CU - Simple Walls - Multibin Shell

With the flexibility of Multiboard there are other options like bigger shells with dividers, etc.. You can of course use the tops in whatever way you need.

Printing

Print with common Multiboard print settings:

• 3 perimeter wall thickness
• 0.2 mm layer height
• 15% infill
• no supports. 
• for the rest, keep your printer's default settings.

The printing orientation is as provided in the file.

For the Shadowboard effect, I suggest to add a color / tool change at 1.2 mm height in your slicer of choice. One idea is to use the same color markings as E3D's Revo to differentiate nozzle diameters.

Additional Notes

I wanted to add a way to have labels, but it was more important to nest them tightly. If you have an idea how to do so, please let me know.