Steam Deck Stick Cap (Configurable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Analog stick cap/protector for the Steam Deck, configurable with OpenSCAD
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
A simple cap for the Steam Deck analog sticks.
There is a plain cap, one with a reeded edge, and one with improved grip.
The model can also be configured to optimize for your printer, etc.
Use the customizer in OpenSCAD (Window > Customizer) to adapt the properties of the model.
If you like this design, please consider leaving a ♥heart. Thanks!
+++ UPDATE 2026/05/21 +++
Added chamfer around the top edge with optional reeds (configurable in OpenSCAD file).
Stronger, easier to print clips around the bottom edge.
----------
Printing
Filament material: PLA(+)
Resolution: 0.20 mm
Supports: Yes (GRIP version)
Top/Bottom fill pattern: Concentric
Notes:
Print PLAIN/REEDED versions upside-down without supports.
Print GRIP version with supports and let it cool down before removing to keep the clips intact.