Small Milk Crate Basket Wall Mount Bar (Walmart and Dollar Store Type Basket)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bar-style wall mount hanger. Check out that beautiful STL file. The circles on the basket are what this…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bar-style wall mount hanger. Check out that beautiful STL file. The circles on the basket are what this slides into. I recommend drilling out two holes somewhere between the two circular parts; I didn't do this as part of the STL in case someone actually needed to hit a stud and my hole alignment wasn't part of the plan.
Honestly, I just used two drywall screws after drilling a small hole for it to go through; The screw still clears the basket no problem.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Filament: Generic PLA Black
Notes:
You -might- use supports if you're worried about it falling over during the print; I didn't have an issue.
I did 30% infill. You can likely get away with less, or do more; These baskets weren't very heavy -- so use your own best judgement. :)Category: Organization