Small Milk Crate Basket Wall Mount Bar (Walmart and Dollar Store Type Basket)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bar-style wall mount hanger. Check out that beautiful STL file. The circles on the basket are what this…
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 58
- Makes
- 0
- Views
- 915
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This is a bar-style wall mount hanger. Check out that beautiful STL file. The circles on the basket are what this slides into. I recommend drilling out two holes somewhere between the two circular parts; I didn't do this as part of the STL in case someone actually needed to hit a stud and my hole alignment wasn't part of the plan.
Honestly, I just used two drywall screws after drilling a small hole for it to go through; The screw still clears the basket no problem.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Filament: Generic PLA Black
Notes:
You -might- use supports if you're worried about it falling over during the print; I didn't have an issue.
I did 30% infill. You can likely get away with less, or do more; These baskets weren't very heavy -- so use your own best judgement. :)Category: Organization