1 / 2
Ford Mondeo Mk5 / Fusion Jacking Pad – Reinforced Lift Point Insert — zdjęcie 1
1 / 2

Ford Mondeo Mk5 / Fusion Jacking Pad – Reinforced Lift Point Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

High-strength jacking pad insert for the Ford Mondeo Mk5 (2014–2022). ✅ Tested on: Ford Mondeo Mk5 (EU)

Ocena
0 / 5
Polubienia
3
Pobrania
40
Wydruki
0
Wyświetlenia
287
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
GNU General Public License v3.0

🧩 Description

This reinforced lift pad is engineered for vehicles based on the CD4 platform:

  • Ford Mondeo Mk5 (EU)

  • Ford Fusion (US)

Since Fusion is the North American twin of the Mondeo Mk5, the jacking geometry should be identical. However, minor trim variations may exist depending on production year.

The design offers:

✔ Accurate OEM-style fit
✔ Increased surface contact for safe lifting
✔ Thick structural ribs to resist shear forces
✔ Suitable for workshop and repeated use
✔ Optimized for PETG / structural materials

It works with common workshop jacks and lift adapters.


🛠 Technical Specifications

Material: PETG (recommended)
Infill: 100% (structural load required)
Orientation: See Print Instructions below
Printer Compatibility: FDM / CoreXY

Important:
This part is NOT a cosmetic cover — it is designed to take load. Print settings below are critical.


🖨 Print Instructions

📌 Recommended settings

  • Infill: 100% (solid)

  • Perimeters/Walls: 4

  • Layer height: 0.20 mm (or finer for surface finish)

  • Supports: Yes under overhangs
    — depends on orientation; see common option:

➡ Orientation A (recommended):
Flat side down on build plate → supports only under internal cavities.

➡ Orientation B:
On edge — more supports, but stronger perimeters.

📌 Material Notes

  • PLA: Not recommended due to heat & shear during lifting

  • PETG: Best balance of toughness & temperature stability

  • ABS / ASA: OK if your printer handles warping


🧠 How to Use

  1. Place the jacking pad insert into the OEM jack recess on the vehicle.

  2. Ensure flush contact around edges.

  3. Position your jack/lift adapter onto the printed pad.

  4. Lift slowly — do not shock load.

  5. Verify fitment before full load.


⚠ Safety & Disclaimer

This part is designed for workshop use only.
While tested on Mondeo Mk5, verify fit before lifting heavy loads.
Always follow standard lifting safety practices:

🛑 Use jack stands
🛑 Lift on level ground
🛑 Inspect print for cracks before each use

Do not use cracked or worn parts.

Tagi