Ford Mondeo Mk5 / Fusion Jacking Pad – Reinforced Lift Point Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
High-strength jacking pad insert for the Ford Mondeo Mk5 (2014–2022). ✅ Tested on: Ford Mondeo Mk5 (EU)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v3.0
🧩 Description
This reinforced lift pad is engineered for vehicles based on the CD4 platform:
Ford Mondeo Mk5 (EU)
Ford Fusion (US)
Since Fusion is the North American twin of the Mondeo Mk5, the jacking geometry should be identical. However, minor trim variations may exist depending on production year.
The design offers:
✔ Accurate OEM-style fit
✔ Increased surface contact for safe lifting
✔ Thick structural ribs to resist shear forces
✔ Suitable for workshop and repeated use
✔ Optimized for PETG / structural materials
It works with common workshop jacks and lift adapters.
🛠 Technical Specifications
Material: PETG (recommended)
Infill: 100% (structural load required)
Orientation: See Print Instructions below
Printer Compatibility: FDM / CoreXY
Important:
This part is NOT a cosmetic cover — it is designed to take load. Print settings below are critical.
🖨 Print Instructions
📌 Recommended settings
Infill: 100% (solid)
Perimeters/Walls: 4
Layer height: 0.20 mm (or finer for surface finish)
Supports: Yes under overhangs
— depends on orientation; see common option:
➡ Orientation A (recommended):
Flat side down on build plate → supports only under internal cavities.
➡ Orientation B:
On edge — more supports, but stronger perimeters.
📌 Material Notes
PLA: Not recommended due to heat & shear during lifting
PETG: Best balance of toughness & temperature stability
ABS / ASA: OK if your printer handles warping
🧠 How to Use
Place the jacking pad insert into the OEM jack recess on the vehicle.
Ensure flush contact around edges.
Position your jack/lift adapter onto the printed pad.
Lift slowly — do not shock load.
Verify fitment before full load.
⚠ Safety & Disclaimer
This part is designed for workshop use only.
While tested on Mondeo Mk5, verify fit before lifting heavy loads.
Always follow standard lifting safety practices:
🛑 Use jack stands
🛑 Lift on level ground
🛑 Inspect print for cracks before each use
Do not use cracked or worn parts.