1 / 2
4 Inch Fence Post Cap for Vinyl Fences / Sleeves — zdjęcie 1
1 / 2

4 Inch Fence Post Cap for Vinyl Fences / Sleeves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CURA SETTINGS: 1) Rotate STL file on its Y axis (Red line in Cura), until its standing up like in the photos. Don't…

Ocena
4 / 5
Polubienia
17
Pobrania
203
Wydruki
1
Wyświetlenia
907
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

CURA SETTINGS:

  1. Rotate STL file on its Y axis (Red line in Cura), until its standing up like in the photos. Don't try to print it on point (unless you want to prove me wrong) -- it doesn't work.

  2. Choose "custom" for print setup.

-Enable Support Brim: YES

-Requires Supports: YES

(I've marked "work in progress" because I want 3 or 4 successful prints in a row before I mark it as completed -- plus I need some pictures!)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: Mika3D PLA Blue


Notes:

Vinyl Fences typically come in white. I had just ran out of white, so I've been experimenting with my design while using Blue.

Category: Outdoor & Garden

Tagi