CNC Vacuum Hose Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are a set of adapters that go from a vacuum, to a cyclonic separator, and finally to a Suckit Dust Boot.I didn't…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Here are a set of adapters that go from a vacuum, to a cyclonic separator, and finally to a Suckit Dust Boot.
I didn't really find any suitable adapters on here so I made my own.
The tolerances are such that these should press fit nicely and stay in place, while still allowing you to remove them if necessary.
There are three adapters, they go from: A: vacuum hose to cyclonic separator B: cyclonic separator to dustshoe hose C: dustshoe hose to dustshoe
These sizes work with my machines and hose, but I believe these are pretty common/standard.
The A one goes from an OD of 49mm to an ID of 43mm. The B one goes from an OD of 49mm to an OD of 32.5mm, and finally the C one goes from an OD of 58mm to an OD of 32.5.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28mm
Infill:
40-50%
Notes:
I used 4 perimeter walls to make them strong, though these shouldn't be wiggling around too much ones pressed into place.
Category: Tools