3-Post Guide for DeWalt DCD794 Cordless Drill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is made for the DCD794 cordless drill to help drill holes perpendicular to surface.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I created this guide to snugly fit my DeWalt DCD794 cordless drill. I used three 9" long, 3/8" aluminum tubing for the posts, and a 5/16"-18x6" long machine screw as the depth gauge. I drilled out the base holes at 3/8", and the cradle holes at 25/64" for slight clearance, and I ran a 5/16-18 tap through the threaded hole. I found three ½" soft springs at my local hardware store to use as a cradle return, which helps with the drilling. Using three springs instead of one allows me to remove one or two springs depending on the job at hand. I also included the F360 file if you want to make any changes. Material is Overture PLA.
Enjoy!