3-Post Guide for DeWalt DCD794 Cordless Drill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is made for the DCD794 cordless drill to help drill holes perpendicular to surface.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 41
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I created this guide to snugly fit my DeWalt DCD794 cordless drill. I used three 9" long, 3/8" aluminum tubing for the posts, and a 5/16"-18x6" long machine screw as the depth gauge. I drilled out the base holes at 3/8", and the cradle holes at 25/64" for slight clearance, and I ran a 5/16-18 tap through the threaded hole. I found three ½" soft springs at my local hardware store to use as a cradle return, which helps with the drilling. Using three springs instead of one allows me to remove one or two springs depending on the job at hand. I also included the F360 file if you want to make any changes. Material is Overture PLA.
Enjoy!