Washer Dryer Spline Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Classic 3D printable knob in the Washer/Dryer style with spline support
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I decided to add a switch to the dryer portion of this laundry center and introduce a ringing belle as an alternate to the default buzzer; used to signal the end of cycle.
Rotary switch has a spline shaft, but all laundry style knob models online come with a D shaped hole. So, decided to design my own. Took about 30 minutes in Onshape!! Came out great!!
Wife loves the silent mode!!
Note: All gcode files are 0.6mm nozzle and 0.3mm layer height (that's how I roll). Prints in half the time of 0.4mm
Here's a link to Onshape for those inclined:
https://cad.onshape.com/documents/7c5e5ca74639264751f20cfc/w/42b29bb46f3e1692a98e4138/e/8d4bf53f03f15d4aa99a3c7d?renderMode=0&uiState=68baf05ad5fc804cc41869b2