Washer Dryer Spline Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Classic 3D printable knob in the Washer/Dryer style with spline support
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I decided to add a switch to the dryer portion of this laundry center and introduce a ringing belle as an alternate to the default buzzer; used to signal the end of cycle.
Rotary switch has a spline shaft, but all laundry style knob models online come with a D shaped hole. So, decided to design my own. Took about 30 minutes in Onshape!! Came out great!!
Wife loves the silent mode!!
Note: All gcode files are 0.6mm nozzle and 0.3mm layer height (that's how I roll). Prints in half the time of 0.4mm
Here's a link to Onshape for those inclined:
https://cad.onshape.com/documents/7c5e5ca74639264751f20cfc/w/42b29bb46f3e1692a98e4138/e/8d4bf53f03f15d4aa99a3c7d?renderMode=0&uiState=68baf05ad5fc804cc41869b2