LEGO-Compatible IKEA SANNAHED Insert (50cm / 19 ¾″)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn an IKEA SANNAHED 3D frame into a LEGO compatible pixel art canvas – 62×62 studs at your disposal!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the big brother to my model for the 25cm (9 ¾″) SANNAHED frame
This insert transforms the IKEA Sannahed 50×50 cm (19 ¾×19 ¾″) frame into a LEGO®-compatible pixel art canvas.
Each piece is only 150mm on its longest side, so it fits almost any FDM printer. This is not for the faint of heart, as its 62x62 stud design means there's 3844 studs to fill - or more than 4× the area of the smaller SANNAHED.
Most printers can only fit one piece at a time, so yes - You'll be starting your printer 17 times before you can supersize your brick art.
The pieces lock together with mostly dovetail connectors. Each locking piece is designed with 0.2mm clearace on all sides. The entire model can be printed without support -Simply sand the recessed dovetail pockets a bit to get rid of the ‘droopy’ first floating layer and glue the pieces together.
The wooden spacer that comes with the frame holds everything snugly, while the depth of the frame even lets you go a bit 3D with your art.
When you’re ready for something new? Pop it out, swap the design, hang it back up. Repeat forever.
Happy Building!
What to print
corner.stl: 4x
middle.stl: 4x
edge.stl: 8x
circle.stl: 1x
If you take on this art project, consider posting a Make once you're done!
I'd love to see what you came up with!
The Poké Ball AND Super Ball designs are included!
(EDIT: I have since learned that it's called a “Great Ball” in english, don't @ me)
You can grab the instruction manuals and a Bricklink WantedLists from the files.
Fair warning, though: These designs are EXPENSIVE.
Pixel Art Designer
Check out Pixilart.com, if you want to prototype your design digitally, as well as find inspiration.
62x62 Canvas: Click Here
Alternatively, you can also download and install Bricklink Studio to directly work with LEGO parts and their original colors.
Notes
Model sizes: 150mm on the longest side → fits on every common FDM build plate
No supports necessary! The gap over the dovetail recess should bridge just fine.
light sanding on the dovetail pockets is required, if you print without supports.
Glue the dovetails into the pockets once you're happy with the fit.
Make sure to put the wooden spacer that comes with the frame between the plexiglass and 3D printed insert for maximum depth.