1 / 2
Extended Safety Stop / Emergency Stop Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bolt-on extension for an emergency stop button.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Have you ever had the problem that you want to stuff the housing of your emergency stop button with fancy electronics but you couldn't make it fit?!
Do not be afraid, I got you covered! I designed an extended housing that bolts directly to the mounting holes in the existing casing. This allows you to install more electronics into the box, for example to integrate it into your smart home systems. But the possibilities are endless.
For assembly you need:
- 2 × M3×15mn cylinder head screw
- 2 x M3 square nut
The extended housing fits standard 67mm x 71mm safety stop buttons.
print settings:
- material: PETG
- layer hight: 0,15mm
- infill: 25%
- support: yes
- brim: no
Stay safe!