1 / 4
BMW Travel & Comfort System Base Carrier
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base carrier for the travel & comfort system.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 308
- Wydruki
- 0
- Wyświetlenia
- 1339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (26)Powiązane
Required additional parts
- 5x M3 inserts
- 4x M3 countersunk screw 10mm
- 1x M3 screw > 20mm
Optional parts
- MagSafe holder with a 17mm ball-head to work as a iPhone or iPad holder (see images)
Print Instructions
- Print the ball-head at min 60% infill
Remarks
I printed the parts in PLA and it is working fine. If it is printed in PLA the infill of the ballhead needs to be min 60%, otherwise it will shear off.