Liczymy pasujące modele…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
A cache designed to mitigate reflection issues when using the ASI585MC Pro camera with an HyperStar or with a RASA telescope.
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
Build a professional protective housing for your Raspberry Pi 5 with Pineboards HatDrive! PIANO integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Wanted a decent case for the HDMI5 touch screen, and as I couldn't find something to fit my needs, made my own. Screen is fully encapsulated, and has brackets to mount to any slot extrusion frame, like the Bear2.1 I'm using mine on. Also…
Attach the mount bracket to the top of the pi case with 4 m3 screws and nuts. Check which version of the HDMI5 you have
I have seen quite a few mounts for the HDMI5 from BigTreeTech designed for the Sovol SV08, however, most of the ones I have tried would prevent me from opening or closing the doors for my official Open Enclosure , or hung well below the…
This project is a fully functional I5 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1‑2‑4‑5‑3, 🔩 Assembly Details The model is assembled…
Build a professional alternative back panel for Raspberry Pi 5/4 housings with the official 7" Touch Display 2. Here we offer you the STL files for a 3D-printed alternative back panel, which has been specifically developed as an addon to…
Raspberry Pi Case with Waveshare Pi5-Connector-Adapter and Honeycombwall-Top and M3-Screw Holes. This modular 3D-printed frame case for the Raspberry Pi 4 or 5 offers a perfect balance of protection, accessibility, and expandability. The…
I have change the bottom for the orignal BigTreeTech cables
I used the bottom set of holes and added an M3 heat shrink insert. Then, I used M3 screws to fasten one Prusawire mount to the left side and this mount to the right side. These mounts attach to the Prusa frame plate on the front of the…
Warning! This project utilizes a lithium-ion battery. Anyone choosing to build this project should exercise caution , as improper handling of lithium-ion batteries can cause fires or injuries. Introduction: While the title of this project…
Case for Raspberry Pi 5 using PCIe extention for 4 NVME SSD, coold with Noctua NF-A4x20 5V PWM. Used hadware: 1x Raspberry Pi 5 1x Suptronics - X1016 1x Noctua NF-A4x20 5V PWM 5x metric screw 2,5x10mm 5x 2,5 washer 5x 2,5 nut Assamble top…
In honour of World Pancake Day I present: The Pi5+Nvme, End to End Case! Created because I found working with a pi5 with a hat on was annoying and having to unscrew things (from the stacked case) gets old real fast. So this new one…
Case for a Geekwire gen6 UPS that keeps my PI powered and safely shuts down if 12v power from MacArthur hat fails.
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
Printing: Petg (suggested) / pla infill -> 60 (suggested) organic support -> dont put any other type Building case: any m3 screw that would fit there Required stuff: Rpi5 Rpi5 case ->…
NCC - MK2 SCIROCCO RaspPi5 - 7Touch 2 Mount - PROTO Basically, scan of the vent and some bits added, feel free to use or refine, this is the prototype so its rough but does fit basically perfectly.
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Case for Raspi5+aliminium-heat-sink (black ones) and Raspi5+original active cooler. Remixed version of case by BlackyIV.
Der Kantenschutz verhindert in niedrigen Umgebungen wie Parkhäusern oder Garagen Beschädigungen an der Heckklappe. Das Modell ist dreigeteilt und kann somit einfach im M-Design gedruckt werden. Vorzugweise aus TPU zu drucken, PETG könnte…
they added a speaker/moved connectors which interfered with mount
Haven't printed this myself, but needed to upload it somewhere for it to be printed. Link to the NVMe base here: https://shop.pimoroni.com/products/nvme-base?variant=41219587178579
V2 improves the operation of compliant buttons and allows more room for the screen. V1 compliant button work poorly or not at all. I am working on a mount for the case so you can put it on either side of the printer. The threads of v1 are…
Compatible with SIBOOR's Voron Trident kit and Clicky-Clack Fridge Door.
If you run several Raspberries (I run 3: Home assistant, WordPress, Dashboard) you need to store them somewhere. I decided to wall mount them under my desk. The result is a simple wall mount that fits this case:…
Hi, added two holes for GPIO and cable routing to suit my needs, feel free to remix it. Shout out to the original creator of the case.
The original case is a great design, but unfortunately didn't fit my my Seeed Studio NVMe-hat because that PCB is slightly longer. This remix makes it fit by removing and manipulating the cutouts of the original model. This also means…
UPDATE 05Nov2024: Hopefully the changes I made to v1.2.1 address the issues in the comments. Case for the BIQU/ BTT HDMI5 V1.2 touchscreen. BTT released V1.2 of the HDMI5, which moved the outlets to the rear of the screen and added a…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Insta360 OneRS 4k GoPro Mount for FPV Drone.Fits a standard gopro style mount. Case supports TBS ND filters. Print in your favorite TPU, you will need supports. I have uploaded a Step file so you can edit in your favorite CAD program. If…
Hier ist der überarbeitete Text basierend auf deiner letzten Version: --- This case needs some additional parts to complete: - You need an HDMI adapter: [Pi5-Connector-Adapter](https://www.waveshare.com/wiki/Pi5-Connector-Adapter) - A…
A case which can fit Raspberry Pi 5, RCNUN DC converter and Geekworm X1001 NVMe hat. Snug-type support is required on the DC converter shelf and recommended on the vertical grill and port openings. I've designed this for passive PoE…
From the original creator: This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch. The case…
This is a box for Rpi5 with NVME ssd drive and SonOff Zigbee Dongle To mount this box you will need these standards parts : 1 Raspberry Pi 5 1 Extension card NVME for Rpi5 (Buy with the Heat Sink):…
A bracket to mount the BigTreeTech HDMI5 display to the left side of a Ratrig V-Core 4. The main bracket can be mirrored to mount the display on the right side instead. BOM In addition to the two printed parts, you will need: BigTreeTech…
Dies ist eine Taschenlampen Halterung für die Led Lenser i5, die an die Flexileine angesteckt wird. Supernützlich bei der Dämmerung oder nachts. Mein Hund wird gesehen, das ist mir das Wichtigste. Sehen und gesehen werden. Infill 50%…
I have reworked this model a little on request so that it also fits a Raspberry Pi 5. The covers can be exchanged as required and no cables (e.g. from a camera) have to be removed. Printed in PETG with Prusa standard profile, with 0.15 mm…
A modified version of @DETMan's BTT HDMI5 Mount for Clicky Clack Door for use with the stealthchanger Door Buffer. Print with normal voron settings.
When I was searching for a case for the Raspberry Pi 5 I wanted to have one which maximizes passive cooling but also has “large” fan for when passive cooling is not enough. In the end I went for the GeeekPi passive heatsink and designed…
Simple hanging mount for raspberry pi, prints in about 70 minutes on a Prusa Mk4.
None of the offerings on printables so far, prints without significant support or needs an extremely tuned machine. Great designs that are relatively easy and reliable to print, don't come in version that supports v1.2 screens or are not…
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
So you wanted a place to put your 5in screen up higher or your Voron 2.4. Now you can if you have my Voron 2.4 Canopy. Will need a BTT HDMI5 V1.2 with the cables coming out the back. You will also have to remove the speaker on the back by…
A search for Stealth Skirt HDMI5 mounts didn't turn up any results that worked with the speaker and jack placement of the v1.2 board. Brightness adjustment buttons on the board can be accessed through access holes with a paperclip or…
This is just a mod from top shelf, which has a cutout for an heatsink of an SSD. It fits for the Geekworm X1001 + MVMe + Heatsink. Please download the other parts from the origin model.…
I have two pi 5's on my pi server rack and both of them have the poe+ and nvme hat. This hat adds a challenge that it is just as long as the pi PCB itself and sits very high which required heavy remixing. I recommend longer screws to be…
This is a tiny footprint case for stacked Wemos D1 mini esp8266 board and Mini560 dc-dc buck converter. D1 mini sits on the bottom of the base part, Mini560 is secured on the cover part by small clips. Solder necessary cables on your…
Remix of “ BTT HDMI5 V1.2 Stealth Skirt Mount” to add 20mm of depth to work with the clicky-clack door system.
Mounts to the front of the printer where the original magnetic bracket goes. The screen that came with my printer suddenly died one day (likely due to the strong magnets placed directly behind it) and Formbot sent me the updated model as…
(This is the thicker Dual SSD version of my Book Case. I have also published a slimmer Single SSD version.) I wanted a good case for traveling and taking my Plex Media Server with me. My requirements for this case: All Ports on One Side 2…
(This is the slimmer Single SSD version of my Book Case with the little SSD on top. I have also published a thicker Dual SSD version.) I wanted a good case for traveling and taking my Raspberry Pi 5 for tinkering. My requirements for this…
The mount uses 14 6x1.8mm magnets that are glued in place The mount uses the same T slot nuts and screws that the Ender 3 screen uses, and the screen is secured to its case using the screws that came with the HDMI5 The case was designed…
NUC7i5-7BNH Bottom Cover. In case, like me, you have any of these units without the bottom. The screws that connect the cover to the rest of the case are also not offered in replacement, so instead I opted to replace them with simple…
NUC7i5-7BNH Board Stand Used to electrically isolate the NUC7i5-BNH motherboard. Used during some addon development.
Printed with VoronDesing parameters. Walls: 4 Filling: Gyroid 40% Material: ABS Tools used 6xScrew M3x16mm 2xheatinsert M3
Case for the BTT HDMI5 v1.2 touchscreen that can be used with KlipperScreen. Includes a separate mounting adapter compatible with the stock LCD mounting arm for a Creality Ender3 V2. Description There are several existing models for the…
I changed the model to fit my needs of a place to store my Olight I5T EOS with magnets on the magnetic spot on my Hyundai Kona (see pic). The flashlight works great in the holder, so just pick it up and use it as I removed material around…
Raspberry pi 5 case with Hailo 8 TPU HAT module I designed this case to be compact while generating airflow through a fan directly to the TPU to allow intensive use as a server working 24/7. I also added support for an SSD hard drive. For…
None of the offerings on printables so far, prints without significant support or needs an extremely tuned machine. Great designs that are relatively easy and reliable to print, don't come in version that supports v1.2 screens or are not…
clip 1STPLAYER MIKU Mi5 for side glass.I used PETG (the clips held the glass tightly) and PA6 (just as good, but they al
Did not like the opening above the bracket which showed the cables running behind the screen from above. One of the main perks of having the 1.2 version of the HDMI5 screen is the ability to hide the cables better, and this aids with…
This is a small, plastic part that replaces the plastic holder on the end of a Roomba's main rubber brushes. After a brush has been used for some time, hair can tangle around the ends of the brush and the friction/heat causes the plastic…
Who has 2.5mm Cap Hat screws lying around? Well, I don't! So I modified this awesome design from Jeepers01 to be a little (0.7mm) deeper on the inside so that the Pi with the NVDAC can fit and the connectors align properly. The downside…
Raspberry Pi3- Pi4- Pi5 10" Rack Mount Bracket Panel 2U - Staffa installazione Raspberry PI 3-4-5 rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: Added versions…
Mounting bracket compatible with flat mesh skirt for Ender 3 NG . Dedicated for BigTreeTech HDMI 5 v1.2 display. Requires 4x M3 heat set inserts to connect with the skirt and 4x M3x8 screws to secure the display. USB and HDMI cables…
I was looking for a mount for the BTT HDMI5 when I found @EDnation 's model. I left the bracket the same, but did a few adjustments to the frame. Mainly fixed some tolerance issues, and added some space for the ribbon cable, as I was a…
It only needed a little force to break the standard HDMI5 bracket at the thinnest part (see picture). This design adds a few ribs to strengthen that part of the design, and adds a couple of holes for tool access. Print with the back down.…
A cache designed to mitigate reflection issues when using the ASI585MC Pro camera with an HyperStar or with a RASA telescope.
I wanted a case for a BTT HDMI5 fo the Voron Zero, that wasn't problematic in transport. So i made this version that mounts the display vertically to the side, and folds up against the side of the printer for transport. The whole thing is…
Couldn’t find an enclosure that fit my use case for the 5” screen so i made my own. Maybe i didn’t look hard enough bit it was a fun evening project. Hope this fits your needs. Materials: any could work, my use case is mobile, so TPU was…
Now you can fit a Pi5 with the Pimoroni NVMe Duo Base!
I customised the top of the case for the PI5 Argon THRML fan. I have also added a gpio slot.
Case para display 5'' BTT, fixado no perfil da SP5 V1 e V3 Não é necessario o uso de suportes. 4x M3*4 2x M3*2 6x M4*5 6x Heat Insert M3 5mm (D) x 4mm (L)
Remix of (FC_ACOPLADOR_DISPLAY_PERFIL.stl), to use only 1 screw to move
Print in ABS with 4 perimeters to make it a solid object.
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
A work in progress to aid in using an AMD MI100 on a Geekworm X1010 for a Raspberry Pi 5. This should accommodate other dual-slot gpus for installation onto the X1010. https://www.raspberrypi.com/products/raspberry-pi-5/…
Place it face down without support. Update 23.03.2025: Ive recognized different heights of coil, between 10,6 and 12,4mm. Thats why Ive made two versions. For easier mounting print this frame.
Pi5 Cube cased all fits together with 6x2 mm magnets, pi screws onto the base board which then uses magnets to clip into the right place and the front and back panels also just clip on. Setup to print on a Ender3S1.
Do pobrania wyprowadzenie 90 stopni (łagodne) na rurę instalacyjną w celu ukrycia przewodów RTV w ścianie, nasadka pasuję na rurę PCV Fi50.. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam:…
I found a small CRT TV in a thrift store, and decided to make it into a mini macintosh. This was a really bad decision. Trying to make one of these yourself is not recommended. I've included the original f3d file, if someone would like to…
This mount I modeled after the R1 Skirts for other displays, but made a mount to fit the HDMI5 based on specs and feedback. Much thanks to mattd on the doom discord for testing this while my screen was stuck in shipping!
Got tired of waiting for a good looking skirt to use on my VORON 2.4 that worked with both the BTT HDMI5 and the Fridge Door mod. I loved the look of the Stealth Skirts by PrintStructor but as that design wasn't the most compatible with…
BigTreeTech HDMI5 1.2 mount for the Switchwire or Enderwire.
