Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this case fits for a raspberry pi5 include the UPS bottom board, the original cooler and a PCIe NVMe HAT board.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation.
When I bought the pi5 and the boards there was no matching case and so I designed this one.
I also designed two lid options (one with vents and one without). The ventilated lid saves up to 4 degrees in summer.
On the back is the normal power button, but i added a large illuminated button on the front. On the right side there is a hole for the cable to connect a li-ion battery expansion card in another case if needed. On the left side you can see the usb-c power cable which is connected to the x1201 board.