Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.06 – €2.52 net (excluding VAT)
For file: x1201case_top_v0.12_0.2mm_PETG_MK3S_2h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.29 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 2.14 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
this case fits for a raspberry pi5 include the UPS bottom board, the original cooler and a PCIe NVMe HAT board.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 100
- Makes
- 0
- Views
- 711
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation.
When I bought the pi5 and the boards there was no matching case and so I designed this one.
I also designed two lid options (one with vents and one without). The ventilated lid saves up to 4 degrees in summer.
On the back is the normal power button, but i added a large illuminated button on the front. On the right side there is a hole for the cable to connect a li-ion battery expansion card in another case if needed. On the left side you can see the usb-c power cable which is connected to the x1201 board.